Cleaning CK Keyboards
- Turn the keyboard off.
- Use a disinfectant wipe to ‘scrub’ down the keyboard.
If wipes are not available, then spray disinfectant/cleaner onto a cloth and wipe the keyboard down. - Allow the keyboard surface to dry/evaporate before powering back on.
This is especially important for the touchpad because it self-calibrates upon power-up. Any chemicals left on its surface can impact its calibration.
TG3 Tested Cleaning Products
Shown below is a list of chemicals that have been successfully tested on TG3’s cleanable products. If none of these exact cleaners can be obtained, mild soap and water may be used.
- 10% Hydrogen Peroxide
- 70% Isopropyl Alcohol Solution
- Household Bleach (Mixed 1:10 with water)
- 3M™ Avagard
- 3M™ CompuBlend™ II Base V
- 3M™ Quat Disinfectant 25
- Aquasonic 100 Gel
- Brulin® Maxima 256™ Disinfectant Cleaner
- Caltech Dispatch (.55% Sodium Hypochlorite)
- Clorox® Disinfecting Wipes
- DuPont Virkon
- Ecolab Asepti Zyme
- Ecolab OxyCide™
- Ecolab Quik-Care™
- Equate Advanced Healing Hand Lotion
- Equate Antibacterial Wipes
- Expose® II 256
- Formula 409®
- HIBICLENS (Chlorhexidine Gloconate Solution 4.0% w/v)
- Lysol® I.C.™
- Metrex Metrizyme Dual Enzymatic Detergent
- Oxivir® Tb
- Palmolive® Liquid Detergent
- PDI Sani-Cloth® Plus Germicidal Wipes
- PDI Sani-Cloth® HB Germicidal Disposable Wipe
- PDI Super Sani-Cloth® Wipes (Alcohol Quat)
- Phenolic 18 Disinfectant Spray
- Purell 62% Sanitizer Lotion
- Purell 62% Wipes
- STERIS’ LpH® Disinfectant Cleaner
- T-Spray™ and T-Spray™ II
- Virex® Tb Disinfectant Cleaner
- Wexford Labs Wexcide 128